Saurabh_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 241
Comments
Recent activity by Saurabh_B-
Hi,Unfortunately we do not have any displays with a UART interface.We do have Serial Displays that use a RS232 Interface, but unfortunately the smallest display has 2 lines and 16 characters.For yo...
-
Hi Ashok,Can you please tell me if you are initializing the display at all?Also can you tell me the voltage you are applying to Pin 3 (V0) of the display?Seeing boxes could mean that the display co...
-
I have a few questions to see if we can narrow down where the problem lies.When you start writing to the display, do you get an acknowledgement back?Could you also measure the voltage on Pin 6 (Vout)?
-
HI,Unfortunately I do not have much experience with Flowcode, however it will take some time to go over the code you have above.
-
Glad to see you have it working properly.
-
Would it be possible to share the portion of the code where you are sending the characters?At many times random characters may appear when there is a timing issue. How fast are you writing to the d...
-
Hi Davek,I have a few more questions, while you are providing 5V to the power, is your logic voltage also 5V?Can you confirm that you have:8-Bit Data,1 Stop Bit,No Parity Bits,No Handshaking.0x9F w...
-
Without using a Voltage translator its hard to say what whether the controller will recognize the 3.3v bits as a '1'.There would also be issues with the contrast when powered with a 3.3v input.We w...
-
Hi,You can bring out the contrast on this display by using the following commands:Follower ControlPower/ICON Control/Contrast Set with Contrast SetTo modify these registers you do need to use the f...
-
No, it is not.The controller used in that display is no longer available. The electrical characteristics of that display would be similar to the display being sold on our website now.