Saurabh_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 241
Comments
Recent activity by Saurabh_B-
Hi Peter,Unfortunately most LCD's are not waterproof on their own. You would need to put inside of a waterproof enclosure. It seems you are already taking care of that with the carbon fiber enclosu...
-
Hello,Unfortunately we do not have any LCD simulators.
-
The backlight should turn on so long as you have the cathodes grounded and the anode tied to Vdd. I would measure the voltage across the cathodes and anode.With the tight area, I would recommend al...
-
Hey Jesse,I'm not seeing a connection from the backlight cathodes to ground, they seem like they're tied together but just floating.Other things I would change is having the Reset pin attached to t...
-
Hi,I was wondering if you could give me a little bit more information:1. What size display are you using?2. Would you be able to provide the date stamp on the touch panel of the FFC of the touch pa...
-
Peter,You will not be able to see anything on the display without the backlight. For TFT displays the backlight is a requirement.The NHD-4.3-480272MF-34 controller board does have a voltage booster...
-
Hi,The rating for the backlight is 50k Hours, until it reaches half brightness.You can also bring down the current supplied to the backlight to increase its life.The led's for the 5" display do dra...
-
The first thing you would have to do is to add a short delay when the power is applied.Then before you start writing I would recommend sending the return home command.There is also a clear display ...
-
Guenther,I will look over your code for any mistakes.All displays are tested before they leave our Facility, chances that it is DOA is fairly low.You can provide 3.3V to both the VDDIO and VDD pins...
-
What changes have been made to the initialization?