Saurabh_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 241
Comments
Recent activity by Saurabh_B-
Hello,Can you tell me what pins are drawing current?The display VDD itself will still be powered without the backlight, for this you would need to trigger the display's standby mode. (DISPOFF)After...
-
Hi,Firmware version 2.1 does have added support for the NHD-2.4-240320CF displays. You can download the files here NHDev Downloads
-
Hello,Unfortunately we do not have a VGA development board.We are working on other controller boards that would allow you to test this display however these are still under development and should...
-
Unfortunately we do not have an updated list for compatible displays, however I can confirm both of these displays will work with the NHDev Development Board.
-
You're right, it is.I will fix that Thanks.
-
This display will communicate with an 8-Bit Interface.
-
Could you tell me how you have the display connected. Are you using our Cable for the NHDev Development Board, and what display you are selecting on the NHDev Development Board.
-
It is a command that turns on the display. So you would configure your development/MCU board to output a "1" or HIGH to this pin (pin 32 of the controller board) in order to turn on the display.
-
HI,Unfortunately we do not have a 16 bit controller board for the 5.7" TFT displays. However the NHD-5.7-320240WFB-ETXI#-1 does come with a 16 bit controller.And for the month of September we have ...
-
I personally have not, the engineer who has been working on this is currently on vacation.I can have him contact you next week.