Alee_S

1. Community
2. TFTs
3. NHD-2.8-240320AF-CSXP-FT Current Supply

Hi crharris12,The supply current range listed in our datasheets is unique to the typical current required for powering the LCD. The logic input currents are incredibly low and are rated for a maxim...

• View comment
• Alee_S
• March 30, 2021 08:29
• 0 votes

1. Community
2. Graphic LCDs
3. NHD-C12864LZ-FSW-FBW-3V3 slow writing

Hi there,Linked below is some Arduino example code written for this display that references a programmed 'Clear display' function that can be referenced. How quickly it will write to the display wi...

• View comment
• Alee_S
• March 27, 2020 17:08
• 0 votes

1. Community
2. Graphic LCDs
3. F-55472GNFJ-SLW-AHN to NHD-C12864WO-B1TFH#-M migration issue

Hi Doug,Glad that adjusting the lower bit of the 'Column Address Set' command worked for the image offset!Thanks for closing the loop on this. Best,

• View comment
• Alee_S
• April 02, 2020 10:48
• 0 votes

1. Community
2. Graphic LCDs
3. F-55472GNFJ-SLW-AHN to NHD-C12864WO-B1TFH#-M migration issue

Hi,This topic is currently being supported via e-mail. Best,

• View comment
• Alee_S
• April 01, 2020 15:09
• 0 votes

1. Community
2. Graphic LCDs
3. NHD-C12832A1Z-FSW-FBW-3V3 won't initialize

Hi YanEngine,I sent you an e-mail yesterday in order to obtain further information regarding your setup. Please contact me on that channel in order to troubleshoot and resolve this issue. Best,

• View comment
• Alee_S
• December 17, 2020 13:22
• 0 votes

1. Community
2. Graphic LCDs
3. NHD-C12832A1Z-FSW-FBW-3V3 won't initialize

Hi YanEngine,Thanks for the response. Will stay tuned for your next update. Feel free to provide any images of your test setup or the display's behavior during this process if you feel it will be h...

• View comment
• Alee_S
• December 11, 2020 13:22
• 0 votes

1. Community
2. Graphic LCDs
3. NHD-C12832A1Z-FSW-FBW-3V3 won't initialize

Hello YanEngine,Sorry to hear you are experiencing trouble with the NHD-C12832A1Z-FSW-FBW-3V3 display.The initialization routine does affect the generated Voltage for the LCD glass to an extent, bu...

• View comment
• Alee_S
• December 10, 2020 09:22
• 0 votes

1. Community
2. OLEDs
3. Newheaven NHD-0220CW-AR3 display

Hi there!Please try implementing the 'Entry Mode Set' command and adjusting the 'BDS' bit to achieve a left entry mode display.If at all you need reference code, please visit our Github link below ...

• View comment
• Alee_S
• September 23, 2019 14:39
• 0 votes

1. Community
2. Character LCDs
3. How to place a jumper on R1 for NHD-0420D3Z-NSW-BBW-V3

Hi Joe,R1 and R2 are the unpopulated pads located just above the labeling, as shown in the image below. However I do understand the confusion, as it's located next to 2 other hole slots.You may the...

• View comment
• Alee_S
• July 22, 2019 10:25
• 0 votes

1. Community
2. Evaluation & Development Tools
3. Need example code for loading bitmap FT81X shield and Arduino

Hi ogee,Our "FT_App_Keyboard" example code on our Github can be referenced as it uses code to generate a Bitmap onto the EVE2 screen. Please take a look there to see if it will be helpful. When dow...

• View comment
• Alee_S
• January 27, 2020 09:55
• 0 votes