F-55472GNFJ-SLW-AHN to NHD-C12864WO-B1TFH#-M migration issue

Comments

3 comments

  • Alee_S
    Hi,

    This topic is currently being supported via e-mail.

    Best,
    0
  • drichard

    This was Alee's response.  Thanks for the help.  It worked.

    Hi Douglas,
    Thanks for reaching out to Newhaven Display!

    This is likely due to which 128 of 132 SEG lines from the ST7565 controller are physically connected to the display being used, as the controller can support upto 132 pixels horizontally. To get around this, try using the following command and shifting the least significant column address (lower bit) by 4 pixels in the left direction.

    ST7565 Controller:

    https://support.newhavendisplay.com/hc/en-us/articles/4414878951703-ST7565P

    0
  • Alee_S
    Hi Doug,

    Glad that adjusting the lower bit of the 'Column Address Set' command worked for the image offset!

    Thanks for closing the loop on this.

    Best,
    0

Please sign in to leave a comment.