Julo
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Activity overview
Latest activity by Julo-
Julo commented,
Hi,Thank so much for your assistance. Your help as resolved my issue, and I don't require any further support at this time. Have a great day
-
Julo commented,
Hi, Thank you for the response. I just don't understand what the default configuration of the screen is. If it's not 4-lane DSI, how do I send the command SETMIPI in order to enable the 4-lane DSI.
-
Julo commented,
Hi,Yes the 4-lane MIPI DSI is available for me.
-
Julo commented,
Hi, Thank you for your response. Could you specify the name of the driver associated with the initialization sequence you sent me? I want to use an NXP i.MX8M Mini to interact with the screen. If I...
-
Julo commented,
Hi, Thank you for your answer. So, how do I send the command SETMIPI (BAh) in order to get 4 MIPI lanes without I2C and SPI? Or is it already the default setup?
-
Julo commented,
Hi, Here is my wiring table. I also have an RC circuit to ensure the correct delay on the reset pin. However, if the I2C doesn't work directly, I will use SPI. Thanks for the advice.
-
Julo commented,
Hi, thanks for the response. I double-checked, and I am sure I am addressing the right registers. I was wondering if it has something to do with my DCX, CSX, and T_IM connections because the driver...
-
Julo created a post,
NHD-3.5-640480EF-MSXP Command SETMIPI
Hi, I was wondering how to set the MIPI DSI-related registers to use 4 lanes. I connected my screen via I2C (3.3V, GND, SDA, SCL) using an MCP2221 USB to I2C/UART converter. However, when I try...