Cody J.
NHD StaffApplications Engineer at Newhaven Display.
- Following 0 users
- Followed by 1 user
- Votes 1
- Subscriptions 23
Comments
Recent activity by Cody J.-
Hello Daniel, Thank you for your interest in Newhaven Displays! Can you provide one or multiple photos of your overall setup? (Arduino Uno + NHD-FT81x-SHIELD + NHD-5.0-800480FT-CTXL-CTP) It is poss...
-
Hello Guy, My best guess, since it is difficult to access the firmware, is that the diagnostics page is using byte codes that may be invisible on the old display, but are visible on the new display...
-
Hello CuriousEngineer, Thank you for the detailed explanation. I recommend taking a look at this example program, specifically at the function at line 115. This function implementation may be a goo...
-
Hello Guy, It is possible there is an interface timing issue occurring. However, it is tough to dig deeper into the problem without knowing more details about the software driving the display. Are ...
-
Hello Tomas, Our capacitive touch panel sensitivity is configured during manufacturing. Manual touch sensitivity control is not possible. If sensitivity modification is required for an application,...
-
Hello Keegan, Thank you for your interest in Newhaven Displays! We do not have PWM brightness control example code for Raspberry PI 4. To learn about RPi4 and PWM, I recommend starting here. The fr...
-
Hello Brandon, Thank you for your interest in Newhaven Displays! The US2066 does not have any stated maximum execution time for the commands within its command set. The best we can recommend is, if...
-
Hello CuriousEngineer, Thank you for your interest in Newhaven Display! Can you provide more information on the software used to drive the display? Are you using a library or your own code to drive...
-
This issue is being supported via email.
-
Hello Wmotter, I recommend using the initialization sequence seen in the Arduino code and make sure it matches the initialization code seen in the associated spec sheet of the exact display you are...