Saurabh_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 241
Comments
Recent activity by Saurabh_B-
Hi,For 3D model requests, can you please email nhtech@newhavendisplay.com.
-
Hi,That does seem like the proper method to change the backlight, do you have any commands you call before that that would cause the command to not work.Also what interface are you using with the d...
-
This sounds like it could be a hardware issue, would it be possible to post a picture of what you have on your display?
-
Hi,Would you be able to post the code snipped of how you are adjusting the contrast?
-
Hello,Are you sending a command to go to line 2? [command(0xC0);]Because of the way the controller is set-up, the RAM Address can be found on page 5 of the display datasheet.You would need to use t...
-
Many of our displays have solder bridges or jumpers that can be moved to reverse the polarity of the backlight or even provide the power for the backlight via the VDD and VSS pins.Do you have a cer...
-
Hello,Another option i would recommend would be our Chip-on-Glass displays specifically the NHD-C0216CiZ-FSW-FBW-3V3.However this display does have a 3V interface and will require 2 external capaci...
-
Hello, Here's the reply I gave:As the display is without having those jumpers populated pin 1 on the connectors is not linked to the mounting holes.You wouldn’t need to cut the trace so long as the...
-
Hello,This can be attributed to a timing issue.Do you know if you are using a delay between each data write?Would you also be able to provide the write function along with the data you are sending?
-
Hello Vincent,What are you seeing on the display? Also what voltage do you have applied to Pin 3?The contrast is adjustable for these displays, and it is also dependent on the temperature, if the d...