Saurabh_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 241
Comments
Recent activity by Saurabh_B-
Would you be able to post a picture of what you are seeing?
-
I was wondering if you could confirm the number of capacitors you have in the circuit along with the values you are using for the following commands:Power Control SetElectronic VolumeBooster Ratio ...
-
HI, is that 6V what you're seeing at Vout?Also what type and values of capacitors are you using?
-
Hello,For the time being I would contact Mouser to set up an RMA for the displays that have the contrast fluctuations. Since you are located in Europe this would be the easiest option. Mouser will ...
-
Hi,Could you please send the initialization sequence you are using for the display.I will conduct a test here as well.Do you by any chance have any light sensitive components on your PCB?Could you ...
-
Hi,Would it be possible to provide the date code on these displays.
-
Hello Nico,The Arduino Uno is a 5v MPU, can you confirm whether you are using a level shifter or if you have some protection built in so that you are not providing 5V to the rest of the display?Thi...
-
You are correct about many displays using a side backlight with a wave guide. You would be able to open the display and change the LED to RED, however this is not recommended.If you were to open ...
-
Hi Alex,It is possible to use a different color backlight for these displays.This display for example has 3 different color LEDs (Red, Green, Blue), and the text on this display will appear in the ...
-
No, you would want to use a 1.2Ω resistor. A 1.2KΩ resistor would result in a very dim backlight.For a current limiting resistor you would want to do the following = (Vin - VLED)/(ILED)(5-4.2)V0.66...