Sergio_M
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 35
Comments
Recent activity by Sergio_M-
Hello,The recommended FFC connector is Molex 54104-4031 or equivalent.Hope this is helpful.
-
Hello,I'm sorry to hear you are having issues with the module.Can you please confirm you are using a known compatible Arduino (UNO, NerO, Leonardo, Mega 2560) and at least a 5V DC power supply with...
-
Hello,The ghosting or image persistence is typically not permanent on TFTs. The effect can be corrected by exercising the pixels over time.Some users will scroll or shift the image on the display r...
-
Hello,Sorry to hear the display stopped working, was the conformal coating applied to the entire display?When using conformal coating we typically coat a chip-on-board display applying conformal co...
-
Pin 3 of the display is tied to the bias voltage circuit which you can see on page 29 of the controller datasheet. The 0.6V for optimal contrast specified in the display datasheet is what you shoul...
-
Thank you for your feedback. We will certainly take this into consideration for the future designs. As a solution to your current problem, have you though about creating a write routine which a the...
-
Hello,To help you getting started please take a look at our example initialization code.8-bit parallel: https://newhavendisplay.com/content/app_notes/8_bit_character.txtIf you have any question ple...
-
Unfortunately, there isn't a way to make this modification. With which display are you trying to use this video board? Have you considered using one of our new EVE2 modules? https://newhavendisplay...
-
Hi Eric,Unfortunately we do not share the source code for our NHDev board. If you are trying to edit the text shown on the display, this can be done by editing the text file on the SD card, as expl...
-
Hello, The following techniques can be used to improve ESD shielding for our displays.One or more options may be suitable depending on your application.- Add a TVS diode between VDD and GND- Tie th...