Ted M.

1. Community
2. Evaluation & Development Tools
3. NHDev Screen transitions

The NHDev board is reading an image file off of the SDCard each time the button is pushed to transition to the next image. This is a slow process and therefore you will see the transition.Depending...

• View comment
• Ted M.
• April 23, 2020 04:48
• 0 votes

1. Community
2. Evaluation & Development Tools
3. NHD-7.0CTP-CAPE-V will not power on

We are sorry to hear you are still having issues with this display.  In some cases, the cause of this type of issue is related to the condition of the power supply voltage to the BeagleBone Black.W...

• View comment
• Ted M.
• June 16, 2020 09:06
• 0 votes

1. Community
2. Evaluation & Development Tools
3. NHD-7.0CTP-CAPE-V will not power on

Please send an email request for support with this RMA to nhtech@newhavendisplay.comRegards,

• View comment
• Ted M.
• April 29, 2020 04:44
• 0 votes

1. Community
2. Evaluation & Development Tools
3. NHD-4.3CTP-Shield -- Hello world example compilation fails

Hi Toby,Try this version of the Hello World script: https://github.com/NewhavenDisplay/FTDI_FT801/tree/master/examples/FT_NHD_43CTP_SHIELD/Basic/HelloWorldSorry for the confusion as the code for th...

• View comment
• Ted M.
• September 01, 2020 09:09
• 0 votes

1. Community
2. Evaluation & Development Tools
3. NHD-4.3CTP-Shield -- Hello world example compilation fails

Hi Toby,Please let us know the sketch file you're testing and describe the errors you see after the compile fails.Also, be sure to use the FTDI_FT801 library file located on our Github link https:/...

• View comment
• Ted M.
• August 31, 2020 10:35
• 0 votes

1. Community
2. Evaluation & Development Tools
3. Schematics Available for NHDev Board?

Hi Jim,I have sent you a response with the schematics by email.Best Regards,

• View comment
• Ted M.
• September 10, 2020 08:38
• 0 votes

1. Community
2. Evaluation & Development Tools
3. NHD-4.3CTP-SHIELD N and Eve editor

Here are some useful links supporting the EVE FT800 Series graphics processors for your reference:Bridgetek’s FT800 Series Programmers Guide:https://brtchip.com/wp-content/uploads/Support/Documenta...

• View comment
• Ted M.
• August 18, 2021 10:16
• 0 votes

1. Community
2. Evaluation & Development Tools
3. Arduino Shield for NHD-2.8-240320AF-CSXP-FCTP?

An off-the-shelf Arduino Shield is not available for the 2.8" TFT. A generic shield proto board can be used for this purpose and wired to the TFT by using our adapter boards.The adapter board inter...

• View comment
• Ted M.
• August 18, 2021 02:42
• 0 votes

1. Community
2. Product Accessories
3. Bezel for 4.3" display

Please check http://www.elwoodcontrols.com as they will offer pre-made front bezels for our 4.3" TFT and many other sizes of our displays.

• View comment
• Ted M.
• July 03, 2017 11:32
• 0 votes

1. Community
2. TFTs
3. Increase sampling rate using FocalTech controller FT6236

Hi Ingrid,The Focaltech FT6236 datasheet appears to only show registers available in "Working Mode".  If there is a register available for setting PERIODACTIVE, then it may only be accessible in "F...

• View comment
• Ted M.
• November 11, 2021 08:34
• 0 votes