Steven Green
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Activity overview
Latest activity by Steven Green-
Steven Green commented,
Thanks Ted, I was thinking of something like canopy glue. Its a form of white gule that dries clear. Steve
-
Steven Green commented,
Just a thought, would it be safe to glue the polycarb block to the display face? Steve
-
Steven Green commented,
Hi Ted, Thanks for the info. I will continue with the design. Another question. What is the value of the LED limiting resistor on the NHD-PCB12832A1Z breakout board? Kinda hard to read value in pho...
-
Steven Green commented,
I went back to the "drawing board" It may only need to be a 1/4" to 3/8" thick. Thanks, Steve
-
Steven Green commented,
Hi Ted, Thanks for the reply. The problem is, the block could be up to a half inch or so thick. Thanks, Steve
-
Steven Green commented,
Oops, I meant the NHD-C12832A1Z-FSW-FBW-3V3 display. I had the wrong data sheet open when I copied the PN.
-
Steven Green created a post,
"lightpipe" for display
I have an application wher the display (NHD-C12864LZ-FSW-FBW-3V3) is too large to mount at the location desired. I would like to mount it behind the location and use a block of polycarb or acrylic ...