Furkan Yaprakcıer
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 2
Activity overview
Latest activity by Furkan Yaprakcıer-
Furkan Yaprakcıer commented,
Hello everyone, It turns out the issue was not related to the Display Panel compatibility, LTDC Timings, or the PCB Design. The root cause was a manufacturing defect (Cold Solder Joint) on the Boar...
-
Furkan Yaprakcıer commented,
My last message is still waiting for approval.
-
Furkan Yaprakcıer commented,
Hello again. To be honest, I’m not entirely sure which mode the display is operating in. However, I’m using the LTDC interface of the STM32, and this interface includes the four signals you mention...
-
Furkan Yaprakcıer commented,
-
Furkan Yaprakcıer commented,
With old screen: pclk pol is inverted, and DE is active low; the image is rendered with no problem. pclk pol is normal, and DE is active low; the image is rendered without issues. pclk pol is inver...
-
Furkan Yaprakcıer commented,
Did you mean these settings? I already tried, and nothing changed.
-
Furkan Yaprakcıer commented,
This is a real-time camera feed. All the whitish colors turn distinct yellow. Again, the older screen has no problems with it. Also tried a different screen with the same model.
-
Furkan Yaprakcıer commented,
These are the settings for my STM32F7 project. Honestly, I couldn't completely figure out how to choose these settings from the display's datasheet; there are too many figures. But the previous dis...
-
Furkan Yaprakcıer created a post,
Color Artifacts After Migrating from 480x272 ATXL to ASXP Model
AnsweredHello everyone, I am in the process of migrating my system from an older Newhaven display to a newer model. Old Display: 480x272 (ATXL series) New Display: 480x272 (ASXP series) I have carefu...
-
Furkan Yaprakcıer commented,
Thank you for your information. We ordered the product from "e-compenent.com" in Turkey. The back of the product is like this. we removed the sticker and stick it back on, so it looks damaged like ...