Saurabh_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 241
Comments
Recent activity by Saurabh_B-
No, Unfortunately this display does not allow you to flip individual characters.
-
Yes, unfortunately with the serial interface the controller's serial data pin is an input only. You would not be able to read from this display.
-
Well thank you for the heads up.
-
The initialization seems to be fine.The only thing i can imagine is that the when you are sending the 0x38 command to set 2 line mode it changing it from 1line mode, which could possibly blank out ...
-
Hi,Any chance you would be able to post your initialization sequence, along with how you are changing the line you are writing to?The display moves onto line 3 because of the addressing, you can fi...
-
First thing that jumps out is that the Follower Control value should be 0x6D if you are following the example on our website.Also verify that the voltage on pin 7 is near 5.5 volts.EDIT: Display i...
-
Hi,Can you tell me what the voltage you have going to VDD and V0 are for this display?
-
Hi,Firmware version 2.1 does have added support for the NHD-2.4-240320CF displays. https://newhavendisplay.com/evaluation-tool-for-prototyping-oleds-lcds-preloaded-sd-card/
-
Yes you would be able to use this with the NHDev Development Board.I can send you a list of components you would need for this to work.
-
How are you tying this to the 1.8" TFT?There are multiple cathodes for the backlight on this display. Do you have a schematic for how this is setup?