Saurabh_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 241
Comments
Recent activity by Saurabh_B-
I'm sorry you are having trouble with this display.Do you have a schematic for how you are connected to the display?
-
Sorry for the misunderstanding.The firmware on the CTP is often programmed by the display manufacturer.The different versions on the firmware could be perfectly normal, however you would have to ch...
-
This might be a firmware related issue, i would recommend contacting FTDI for more support. they've worked with more manufacturers than we have and they might have a fix for it.
-
I'm sorry you are having troubles with the display.Do you have a datecode printed on those cables for the CTP?
-
This would depend on how you are planing on communicating with the display.Most CTPs have have built in Controllers have multiple drivers available; at times these are even provided by the manufact...
-
Hello,The driver is not the same thing as a TFT controller.While you will be writing to the driver to show anything on the display, it does not have a built in RAM and it doesn't refresh the screen...
-
Hello Darshana,Fonts and other graphics are controlled by the software and the controller that write to the display.The onboard display controller will only show what is loaded onto the RAM.Could y...
-
Hi,You would need to either create a font table for yourself or download a library that has these tables built in.Take a look at a few of the libraries below:- http://www.microchip.com/forums/downl...
-
Hi Larry,You shouldn't have any issues running both at 3.3V
-
Hi,The 2.4" TFT has an optimal 65° Viewing Angle in all directions. The 12 o'clock grayscale inversion shouldn't be an issue until you go past that.Unfortunately we do not have any other displays t...