Saurabh_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 241
Comments
Recent activity by Saurabh_B-
Hi,Unfortunately those options aren't feasible.- The font tables on these controllers are set, and it is not possible to overwrite them.- Because of the technology, the screen has to be refreshed s...
-
Hello,We haven't changed the backlight circuitry for these displays, would it be possible to measure the current you have input into the backlight?
-
Hello,I have attached my SPI Code for this display using an Arduino: //---------------------------------------------------------/*SPI Code.cProgram for writing to Newhaven Display Serial LCD Charac...
-
I have been able to write to this using 0x78, I have attached my code below: /************************************************** Code written to drive NHD-C0220BiZ-FS... Using Arduino Mega.* Ardu...
-
Hello Bob,Yes it would be possible to do.It would require a starting MOQ of 500~1k Pcs.Please email nhtech@newhavendisplay.com to setup a quote.
-
Hello,This display uses the ST7032 controller with a 4-Line SPI.You can get more information about the communications protocols here: https://newhavendisplay.com/content/app_notes/ST7032.pdf W...
-
Hello David,If you have VDD and VSS going to pins 2 & 3 of the display, they do not need to be applied to pins 5 & 6, they are all tied internally.For this i would recommend using the following:put...
-
That's great to hear, were you able to figure out the command that helps you get to the second line?Instead of being a new line, this is actually the Set DDRAM address.You can find a datasheet for ...
-
Can you tell me what letter you are seeing on your display?Also How long are the delays in your code?
-
Hello,Looking at your trace, it looks like you're clocking in the SDA on the falling edge.When you are sending the Address, it looks like you are sending a 0xF0 instead of the 78. Would you be able...