dfansler
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 4
Posts
Recent activity by dfansler-
Which model TFT (hopefully a 2.4") has double buffering?
I am working on a project where I update data on the LCD. While I am running an AT32UC at 66MHz (240MHz internally), the update of the screen is why too noticeable. I saw in a previous post that ...
-
NHD-5.0-800480TF-ATXL#-T and NHD-5.0-800480TF-20 Controller Board No Touch?
I recently purchased 3 each of the above units. The X+,X-,Y+,Y- signals from the display are carried on the 40 pin conductor between the display and the NHD-5.0-800480TF-20 Controller Board. Ther...
-
NHD-2.4-240320-CTCI#-T white screen only
Like others I have read about on the forum, I get nothing but a white screen. I have tried several different init codes I have found with no luck. I know the signals are getting to the display - ...
-
NHD-7.0-800480EF-20 Controller Board and the backlight on a 800x480 LCD Display
I am trying use the NHD-7.0-800480EF-20 Controller Board with one of your 800x480 resistive displays. I have not been able to find any info on what voltage you feed Pin3 B/L Enable Power Supply B...
-
NHD-7.0-800480EF-20 Controller Board
I recently purchased NHD-7.0-800480EF-20 Controller Board to go with a 480x800 touch panel from NHD. A couple of questions about the board that I did not see in the docs:1. What voltage does the...
-
Controller for 800x480 TFT Display
I have a couple of the 800x489 TFT displays. The older one came with the SSD1963 controller and the newer one (NHD-7.0-800480EF-ATXL#-T) without a controller.question 1 - do I need a controller fo...
-
How do you set the SED1963 to 8080 mode?
The SED1963 data sheet you set the "conf" line to define if the SED1963 is in the 8080 or 6800 mode. In that the NHD‐7.0‐800480WF‐CTXI#‐T does not have the "conf" line, how do you tell the SED1963...