mike_s
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 3
Comments
Recent activity by mike_s-
Hi Dave,that's good, I was going to suggest (if by chance you are using an STM32 or similar where you can change the I/O drive strength), to set the I/O 'strength', or in STM32 case, the 'speed', a...
-
Hi Dave,I don't have my code in front of me at the moment, but I remember checking the other day against the latest datasheet, and my timing numbers now match exactly what is in the sheet, so I did...
-
Hi All,Just wanted to update, that this issue can now be CLOSED as SOLVED.The offset shown in that image was because the datasheet in 2018 for this TFT had the HBP (Horizontal Back Porch) value as...
-
Finally,7.0" TFT is working perfect, thanks so much, I have both 5.0" and 7.0" working awesome!BTW, also verified that the 'Data Enable' is indeed 'ACTIVE HIGH', so STMicro has an error in their da...
-
Hi Ted,If you all are certain that the pin34 DE is definitely ACTIVE HIGH logic, then that means STMicro messed up their data sheet, since I had to set the LTDC -> DE polarity to 'Active Lo'....but...
-
Hi,I looked over the Arduino and FT81x schematics, the FT81x shield gets ALL of it's power from the arduino power header, so you absolutely MUST use a good DC power supply for that arduino DC jack....