blaubaer
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Activity overview
Latest activity by blaubaer-
blaubaer commented,
Dear Retheesh,thanks for your immediate help - really fast response!! Nice support forum here!I'll check and change the initialization sequence and report the result here later.Regards,Michael
-
blaubaer commented,
This may take a while - I didn't code it!I'll come back to you when I got it!Regards, Michael
-
blaubaer commented,
The text is printed from right to left and in a mirror I can read it...
-
blaubaer commented,
Hi Retheesh,now basically it works, but characters are mirrored - I will recheck the solder joints....Regards,Michael
-
blaubaer commented,
Hi Retheesh, Quote from: Retheesh_M on March 04, 2015, 10:06:19 AM On the new display (NHD-0420CW-AG3) there are two additional pins:Pin 15 = CS (Chip Select) Active LOWPin 16 = RES (Reset Sign...
-
blaubaer commented,
Dear Reteesh,thanks for the quick response!The NHD-0420CW-AG3 display is still not working. Let me shortly point out what I did so far:I've the NHD-0420DZW-AY5 display in use in my application and ...
-
blaubaer created a post,
NHD-0420CW-AG3 MPU Interface Pin Selection and Power Supply
Hi,for 8-bit parallel 6800 interface mode the NHD-0420CW-AG3 display spec shows for pin BS0 = 0, BS1=0 and BS2=1 - can I connect BS0 and BS1 to ground and BS2 to +5V to switch the display into th...