Andrew_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Activity overview
Latest activity by Andrew_B-
Andrew_B commented,
Paul,I replaced my 3.3V MPU with a 5V MPU and it solved my problems. There was nothing wrong with either LCD. I just overlooked the fact that the LCD required 5V logic. This would have been one o...
-
Andrew_B commented,
Hi Paul, thanks for the response. R1 and R2 are open, and the baud rate for the program is 9600. I was able to get the LCD to display characters correctly on a breadboard, but my problems started a...
-
Andrew_B created a post,
NHD-0216K3Z-FL-GBW-V3 outputting 5V on data pin
Hello,I am using a NHD-0216K3Z-FL-GBW-V3 Serial LCD Module configured for RS-232 communication. Datasheet: http://www.mouser.com/ds/2/291/NHD-0216K3Z-FL-GBW-V3-35705.pdfI have successfully transmit...