Alee_S
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 67
Comments
Recent activity by Alee_S-
Hi tcontrada,Please review the technical specifications of our NHD-5.0-800480FT-CTXL-CTP TFT EVE2 module consisting of an FT81x graphics engine controller that can generate various widgets, graphic...
-
Hi Milind,It appears the OLED display has initialized properly under the STM32F4 platform at the very least, but any data routines are unable to go through for some reason.A simple check would be t...
-
Hi there!You may find the ESD ratings for the displays under our 'Quality Information' table located on Pg. 12 of the displays datasheet.Datasheet: http://www.newhavendisplay.com/specs/NHD-0420DZ-F...
-
Hi jimr,I would recommend taking a look at Samtecs website (https://www.samtec.com), as they have an assortment of connectors and cables at various pitch and length that may help fulfill your requi...
-
Hi Michele,The code you have shown looks good to me.It could be possible that Pin 12 may not be receiving enough contrast voltage to display correctly, hence you are seeing blue with a contrast los...
-
Hi there,The ST7032 LCD controller is capable of running I2C interface. However, this particular NHD-C0216CZ-FSW-FBW-3V3 display does not have I2C pins brought out from the controller to the user, ...
-
This topic was further supported via e-mail.
-
Hi timbro,Thank you for providing images of your hardware connections + schematics. The images you have provided are sufficient. As in my original post, we can use another brand of display and hav...
-
Hello timbro,I'm sorry that you are experiencing these issues with our display for a long duration of time I have tried to replicate your problem at the lab, but to no avail. I verified the display...
-
Hi again,PORTD consists of my data lines(DB4-DB7 for 4-bit mode), while PORTB consists of my control lines(Enable, R/W, and R/S). You mentioned you have been using 2 additional pins on the same por...