Alee_S
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 67
Comments
Recent activity by Alee_S-
Hi Duwaar,I should have clarified; I meant to ask if you can check the voltages across Pin 1-5 with respect to GND. Sorry about the confusion.Also, I've tested and verified this program to work her...
-
Hi Duwaar,I'm sorry to hear you are experiencing issues with this display.For your convenience, I've linked some sample code that's been tested and verified to work for the NHD-C12832A1Z display. P...
-
Hi adunkin,In a typical design using the SSD1322 controller, an intersection of 1 Segment line and 1 Common line will form a pixel, and 4 Segments are a part of each RAM column address. The Ram col...
-
Hi adunkin,Please reference our Arduino sample code written for the NHD-2.7-12864WDY3 display that calls the command for using the default grayscale settings in the initialization sequence and uses...
-
Hi Ankush,Please review our Arduino specific example code that will be helpful to reference in order to better understand pixel control implementation for our NHD-3.12-25664UCB2 display:https://www...
-
Hi Ankush,It is possible the NHD-3.12-25664UCB2 display may have initialized properly, but since there appears to be no pixel data written to the screen or functions after the initialization, it is...
-
Hi NaxNir,Please contact us at nhtech@newhavendisplay.com and we can e-mail you some sample code written for this display using an Arduino Mega for reference. Best,Alee_S
-
Hi, This topic is currently being supported via e-mail. Best,
-
Hi LarryA,The NHD-C12864WO-B1TFH#-M display would require an external contrast control using a potentiometer in order to properly tune the contrast to have the pixels appear as needed. Using just t...
-
Hi crharris,Please review and reference our Arduino example code written for our NHD-2.8-240320AF-CSXP-F display written in 8-bit parallel mode that may be helpful to examine:https://www.newhavendi...