Alee_S
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 67
Comments
Recent activity by Alee_S-
This topic is currently being supported via e-mail.
-
Hello there!Unfortunately I could not replicate the issue you are having, as I ported your attached code into my Arduino Mega 2560 using 4-bit parallel interface, and the display is working fine fo...
-
Hi Matthew,Unfortunately, the display is not capable of having one side or portion of the display have a blinking effect, while leaving the other side alone. However, we can manipulate the commands...
-
Hi georgek,I'm glad you got it running! Thanks for posting your solution here as well!
-
Hi Georgek,I just powered on the NHD-5.0-HDMI-N-RTXL-CTU using the digital dimming method you were using, and it seems to work fine for me.The HDMI cable being connected shouldn’t have any impact o...
-
Hi Tim!Our Product Knowledge Center is a good resource for finding more information on the differences in terminology between premium, MVA, and sunlight readable: Sunlight readable: https://support...
-
Hi Imsbio,Unfortunately our 4.3CTP Shield models do not support video operation.Please consider using our 4.3" EVE2 TFT modules instead with the same brightness model which can support dual or quad...
-
Hi ton88,Thanks for bringing this to our attention. Please note the voltage and current values are correct, and our team has been alerted to this error and will work to revise the datasheet to refl...
-
Hi jbuse,Please try applying power to Pins 17-18 of the display for activating the backlight LEDs for the display along with Pins 19-20 for GND.Any activity occurring on the LCD will likely not be ...
-
Hi,The NHD datasheet references the display being configured to use the 8080-II Series MCU Parallel Interface, which lists IM0=0 as 16-bit parallel and IM0=1 as 8-bit parallel, and can also be foun...