
Ted M.
NHD StaffApplications Engineer at Newhaven Display
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 212
Activity overview
Latest activity by Ted M.-
Ted M. commented,
Hi Zogster,Take a look at the Gameduino Library for the EVE2 based NHD-4.3-480272FT-CSXV-CTP display module as this library will support the Teensy.https://excamera.com/sphinx/gameduino2/code.htmlR...
-
Ted M. commented,
Hi Newton,Try increasing the contrast current using C1Here are some values from our example code on Github https://github.com/NewhavenDisplay/NHD-1.5-128128ASC3_Example/blob/master/examples/test/te...
-
Ted M. commented,
The resistor at at VSL would typically be 50 Ohms. Please review the schematic for the NHD-1.5-128128ASC3 display as a reference.https://newhavendisplay.com/content/specs/NHD-1.5-128128ASC3.pdf If ...
-
Ted M. commented,
Hi Newton,The resistor value calculation for IREF can be found in more detail on page 25 of the SSD1351 datasheet and I also attached it to this post for your reference. https://support.newhavendi...
-
Ted M. commented,
Hi Fred,It's good to hear you have this working!Thanks for sharing your solution as it will help others facing a similar issue.Best Regards,
-
Ted M. commented,
Thanks for your post
-
Ted M. commented,
Hi mprowe,Thanks for the feedback.Our Web design team is looking into the CAPTCHA function to see if we can improve it's use.Best Regards,
-
Ted M. commented,
Its good to see you have this working. In some cases the logic low does not get pulled down strong enough and requires a pull down resistor. Thanks for providing your feedback on this.
-
Ted M. commented,
Hi Frank,Please let us know the part number of the display in question.Regards,
-
Ted M. commented,
Take a look at these shield stacking headers to see if they will help give you more spacing:https://www.amazon.com/Shield-Stacking-Header-Arduino-MEGA/dp/B0756KLNLX