Engineering Support
Community moderator- Following 0 users
- Followed by 1 user
- Votes 10
- Subscriptions 781
Comments
Recent activity by Engineering Support-
Official comment Hello, Thank you for reaching out. Could you please tell me if you are using 2-Lane or 4-Lane mode? Best Regards, Engineering Support
-
Hello Lilian, As the NHD-2.4-240320CF-BSXV-F display does not support MIPI interface and only supports 3/4-wire SPI interfaces. I will recommend you to look at our example code NHD-2.4-240320CF-BS...
-
Hi Adam, Unfortunately, with the current design, it is not possible to control the backlight on the NHD-2.8-CSXP-BREAKOUT display module.
-
Hi, Thank you for your inquiry. Please note that our NHD-2.4-240320CF-BSXV-F display supports only 3/4-wire SPI interfaces. Could you please clarify what you are trying to achieve and which develop...
-
Official comment Hello Valentin, Yes, it is possible to use 4-wire SPI for the NHD-2.8-240320AF-CSXP-FCTP. This can be seen in page 5 of our datasheet for this display, which I will provide below Please let me know...
-
The issue was related to the customer's reworked board. After the board was corrected by the customer, the issue is no longer present. Closing this request. Please don’t hesitate to reach out if yo...
-
Hi, We can share this information with you via email. Please expect an update from us by the end of this week.
-
Official comment Hi Nadheem, The NHD-2.4-240320AF-CSXP-CTP has recently gone through a revision change from Rev2A to Rev2B. This change added support for 4-wire SPI. It seems like you have received the Rev2A versi...
-
Hello Shubha, Thank you for walking us through the tests you performed. However, based on the images shared, it is difficult to determine the exact nature of the flickering you are experiencing. Wo...
-
Yes, that should be the latest Rev. Regarding the pixel aspect ratio, it is not perfectly square. It should be around ~1.06:1 based on calculations.