2X20 small display (up to 70x20mm) with i2c interface

igorak77

• September 27, 2016 09:07

Hello,
I am looking for 2x16 or  2x20 character display that should be connected to Intel Atom processor.
The problem that I need very small display (up to 70mm length) and with  .
I found that NHD-0220FZ-FSW-GBW-P-3.3 meet these requirements but it`s support only parallel interface  (Intel processor don`t have this one).
The questions is:
1. Could you please check and suggest display with these requirements?
2. Could I stay with option of NHD-0220FZ-FSW-GBW-P-3.3 and  connect i2c to parallel bus (8 bit) controller 8 bit PCA9564 ? In this way the i2c side will be connected  to Intel and Parallel bus side to display.
Thanks

0

• 

  Saurabh_B

  • September 28, 2016 09:07

  Hello,
  
  Another option i would recommend would be our Chip-on-Glass displays specifically the NHD-C0216CiZ-FSW-FBW-3V3.
  However this display does have a 3V interface and will require 2 external capacitors and 2 pull up resistors.
  
  Like you mentioned above with the NXP PCA9564, you could use a LCD Backpack that would allow you to convert from the I2C to the 8-Bit Parallel.
  LCD Backpack: http://www.hobbytronics.co.uk/i2clcd-backpack-v2

  0

Please sign in to leave a comment.