Seps525 issue

Loic75300

• January 04, 2022 08:28

Hello all,

Im using a seps525 display with a microchip pic32
It use spi bus, spi is also connected to sensor

Everything works well, but if the seps is on reset and not powered the miso signal is pulled low and sensor is not accessible....
It works if the seps is powered

Is it normal ?

0

• 

  Ted M.

  NHD Staff

  • January 07, 2022 09:13

  Hi Loic75300,
  
  Have you tried using a pullup resistor on the miso line?
  
  Best Regards,

  0

Please sign in to leave a comment.