NHD-0216B3Z-FL-GBW-V3 の推奨回路について

Comments

1 comment

  • Ted M.
    NHD Staff
    In order to configure the display for SPI communications, a jumper will need to be added on the R2 location on the back of the display.

    The P2 connection with 6 through hole solder connections will be used for wiring the SPI bus.

    Please refer to the datasheet for more details: http://www.newhavendisplay.com/specs/NHD-0216B3Z-FL-GBW-V3.pdf

    Best Regards,

    0

Please sign in to leave a comment.