I'm using a NHD-0216K3Z-FS(RGB)-FBW-V3 with a little 8-bit PIC to drive it. I'm looking at an operational temperature range about -20C to +50C operation. What are the specs on the UART communications interface for the NHD-0216K3Z-FS(RGB)-FBW-V3 display? Mainly, I care about the specs at the default baud rate of 9600. Min/max acceptable incoming baud rate over temperature. I do not read any registers from the display, so the transmit baud rate over temperature is also not of critical concern, though I would not be upset if that is provided.
Please sign in to leave a comment.