NHD-5.7-320240WFB-ETXI #-T-1-ND

erps

• October 15, 2014 09:07

Hi:

I need a 32-position flat flex ribbon cable to connection the signals from the display to the uC board.
Do you provide for that?

Another question, the datasheet on page 4 shows connector CON2 as the interface connector. However, on the board it is shown as CON3 (picture attached), which one is correct?

Thanks,

0

• 

  Michael_L

  • October 16, 2014 09:07

  Yes, we have a 32-pin FFC available here: https://newhavendisplay.com/32-pin-flat-flex-cable/
  As for the interface connector, it is CON3 (the 32-pin connector).

  0
• 

  erps

  • October 16, 2014 10:07

  I am going to use the interface board NHD-FFC36-ND.
  Can you provide dimensions on that board?
  Distance between Mounting Holes?
  Thanks,

  0
• 

  Michael_L

  • October 17, 2014 10:07

  The dimensions and pitch can be seen on our website for that product: https://newhavendisplay.com/36-pin-0-5mm-pitch-ffc-connector-breakout-board/
  52mm x 40mm, 0.5mm pitch FFC connector, 2.54mm pitch thru-hole.

  0

Please sign in to leave a comment.