Controlling NHD-3.5-320240MF

cho5443

• July 28, 2015 09:07

Hello .

I am trying to use  a NHD-3.5-320240MF TFT display.

all of source codes handling this display use a controller.

However, I want to control the NHD-3.5-320240MF without any controller.

For example, I used MCU to control a NHD-1.8-128160EF display.

Can I get an example code using MCU for NHD-3.5-320240MF.

Best regards.

0

• 

  Saurabh_B

  • July 28, 2015 10:07

  Hi Cho,
  
  Our 1.8" Displays have a controller built-in, so when you're programming directly from your MCU you're still talking to a TFT controller.
  
  Unless your MCU has a built in TFT controller you might not be able to directly connect to the 3.5" display.

  0
• 

  cho5443

  • July 28, 2015 11:07

  Thank you for your reply.
  
  In the datasheet, this module include NV3035C.
  Do you mean that I have to use another controller to handle NHD-3.5-320240MF-ATXL#-1?
  
  Is NV3035C not a controller? If so, please recommend me a controller for NHD-3.5-320240MF-ATXL#-1.
  Thank you again.
  
  NHD-3.5-320240MF-ATXL#-1
  320 x 240 Pixels, 3.3V LCD, 24-bit Parallel RGB Interface, White LED Backlight, Transmissive, 12:00 Optimal View, Wide Temperature (-20C to +70C),...
  Controller/Driver: NV3035C

  0
• 

  Saurabh_B

  • July 29, 2015 11:07

  The NV3035C is just the Driver, we do have controller boards specifically for this display. 
  
  8-bit Parallel:   https://newhavendisplay.com/controller-board-for-3-5-tft-displays-20-pin-ffc-8-bit-parallel/
  
  

  0

Please sign in to leave a comment.