NHD-4.3-480272EF-ATXL#-T FFC Connector

Garyio

• August 27, 2015 09:07

In the NHD-4.3-480272EF-ATXL#-T Datasheet it shows the recommended LCD connector on page4 to be a Molex p/n: 54132-4097 but on the NHD web site it shows a Molex 54104-4031 to be used with this display. I see they are almost the same but the first one is a Bottom contact and the second is a top contact. Which one should I use? I can't find any of the 54132-4097 but I have found a compatible alternative bottom contact 54132-4062. Will that work?

0

• 

  Saurabh_B

  • August 28, 2015 09:07

  Hi,
  
  Either the 54104-4031 or the 54132-4062 will work just fine, The deciding factor is where you would be likely to mount the display. On our controller they use a top contact FFC connector because it is often attached onto the bezel of the display.

  0

Please sign in to leave a comment.