Connecting NHD-4.3-480272MF-34

Peter Cyriax

• December 16, 2015 09:07

Hi,

My display and controller just arrived: NHD-4.3-480272EF-ASXV#-T + NHD-4.3-480272MF-34.

Now I have to connect them to an Arduino Due.

"We also recommend" for the controller suggests a NHD-FFC20-1 FFC adapter - but this is 20 pin 1.mm to 2.54 mm adaptyer according to the annotation, though the pic looks like 0.5 mm to 2.54, and the J3 output of the NHD-4.3-480272MF-34. is 34 pin 0.5 mm pitch.

Can you please tell me the correct part numbers - adapter board + FFC ribbon to connect the controller to the adapter board.


Thanks



Peter

0

• 

  Saurabh_B

  • December 17, 2015 09:07

  Hi peter,
  
  Two options you have to connect the -34 controller board to your arduino.
  
  1. You can use the NHD-FFC36 with a 34 Pos 0.5 mm Pitch FFC such as THIS
  Because the PCB has a 36 position Molex connector, you would need to off set to one side an leave 2 pins un connected.
  
  2. You could get the following:
  -NHD-COG14-36
  - Solder a 34 position FFC connector onto the 0.5mm pitch bar. Example of 34 pos connector OMRON XF2M-3515-1A
  You will still need the FFC Cable from above.
  
  With both of the parts above you will need 2x 2x9 Standard Pin Header

  0
• 

  Peter Cyriax

  • December 17, 2015 10:07

  Hi Saurabh,
  
  
  That makes sense - thanks.
  
  
  
  Peter

  0

Please sign in to leave a comment.