Using RGB666 on NHD-4.3-480272EF-ATXL#-T

carrasco

• June 13, 2017 09:07

Hello,

After reviewing the documentation related with the NHD-4.3-480272EF-ATXL#-T, I have not been able to find how to terminate the unused pins.
1. Is required to terminate the unused RGB pins? Ground, pull-down resistor?
2. Are the unused pins the LSB or MSB?

Thank you,
carrasco

0

• 

  Saurabh_B

  • June 13, 2017 10:07

  Hello,
  
  You would want to ground the unused RGB pins. These would be the LSB (R0,R1, G0, G1, B0, B1)

  0
• 

  Paul_B

  • June 14, 2017 10:07

  Hello carrasco,
  
  One approach is to wire all the unused bits to a fixed value (typically zero - Ground). Please note that you do not need to utilize a pull-down resistor. 

  0
• 

  Paul_B

  • June 15, 2017 10:07

  You can also wire them to the upper bits, in sequence :)

  0

Please sign in to leave a comment.