How work with NHD-0216AW-SB3

Guest

• May 17, 2017 05:40

Good afternoon! I want to use the NHD-0216AW-SB3 display in my design, but having looked at the instruction set I do not understand how to form them. For example, D / C #, R / W # signals for displays with a SPI interface are not available at all. Is the correct datasheet posted on the site for this display? Is it necessary to somehow generate signals IS, RE, SD?

0

• 

  Saurabh_B

  • May 17, 2017 16:30

  Hello Racurs,
  
  The datasheet is set up properly. The D/C# and R/W# bits are set when sending the initial data.
  The information for this can be found on page nine of the controller datasheet https://newhavendisplay.com/content/app_notes/US2066.pdf 
  
  Please also note that when sending data to this display I you do need to break each byte into half and send 4 bits at a time. This is also explained on page ten of the controller datasheet linked above.

  0

Please sign in to leave a comment.