Connector type on NHD-2.7-12864UCY3

tracyb

Hi,
I am aware that there is a 20 pin header with a 2.54mm pitch on the board and have used that successfully. However there is a smaller pitch header on the board with a 1mm pitch that is surface mount. This one is vastly superior and using FF cables is what I want to do.

What part number connects to this surface mount header?

0

Comments

4 comments

Date Votes
  • Paul_B

    Hello,
    Please see the part numbers below:

    Molex Part# (20-Pin 1.0mm Pitch Top Contact):
    52207-2060

    Molex Part# (20-Pin 1.0mm Pitch Bottom Contact):
    52271-2069

    Feel free to contact me if you have any questions  

    0
  • matt11

    Hi Paul_B,

    Are you an employee of Newhaven?

    If so, I noticed on a picture of the NHD-2.7-12864UCY3 display, this 1 mm footprint is covered by a sticker. Is this how the boards are sold? I'm concerned from a manufacturing point of view. Is there an option to purchase this board with the 1 mm connector already mounted?

    0
  • Saurabh_B

    Hi Matt,

    You would be able to purchase this display with the 1-mm connector soldered on to the display.
    Depending on how many you order we can provide a quote for the part.

    If you are ordering one or a few you can simply add the following to your cart:
    - NHD-2.7-12864UCY3
    - Molex_52271-2079
    - Soldering Fee (Please add this to the notes)

    0
  • Engineering Support
    Community moderator

    Update:

    We now sell this display with a 20-pin Molex connector (52271-2079) in white or yellow colors:

    https://newhavendisplay.com/2-7-inch-yellow-graphic-oled-module-with-molex-connector/ 

    https://newhavendisplay.com/2-7-inch-white-graphic-oled-module-with-molex-connector/ 

    0

Please sign in to leave a comment.

Didn't find what you were looking for?

New post