NHD-7.0-800480FT-CSXN-CTP - Horizontal Dead Zones



  • Ted M.
    NHD Staff

    Hi Scutty,

    Please try running the following example code from our Github for the 7" EVE2 TFT.


    If the power supply is known to be sufficient at 7V and at least 1A, this known configuration will work without issue.

    Best Regards,

  • scutty

    Sure enough it was a power issue. Big thanks for the quick reply from NHD tech support. I should have know with all the warnings in the datasheet. My 6V supply can go back in the drawer. With a bench supply I found that 7V is the very minimum. This setup, no other shields or modules, pulled 750mA running this sample code. Now running with a 9V, 1A wall wart without issue. The above sample code ran stock, out of the box with no changes.


Please sign in to leave a comment.