William Quigley
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Activity overview
Latest activity by William Quigley-
William Quigley commented,
I was using a generic 115VAC to 5VDC adapter. I swapped for a 12V-5V step down converter ("Envista") because I will be using the display on my boat. The power LED on the back of the display was on ...
-
William Quigley commented,
Bad power! I swapped for a different power supply and now it's working.
-
William Quigley commented,
I switched to Debian 11 "bullseye" because there the hdmi configuration is still in config.txt, but same result. I also tried hdmi_safe=1 and hdmi_drive=9 The display flickers a few times during re...
-
William Quigley commented,
Those lines are doing *something*. Now when I plug into the Samsung monitor it is set to 800x480, but still nothing on the NHD.
-
William Quigley commented,
Here's my config.txt. I added the lines you suggested but changed resolution for my display. # For more options and information see# http://rptl.io/configtxt# Some settings may impact device func...
-
William Quigley created a post,
NHD-5.0-HDMI-N-RSXP-CTU on RPI Zero 2W
Hello, I am not able to get the NHD-5.0-HDMI-N-RSXP-CTU working on RPI. My Pi (Zero 2W) was plugged into Samsung desktop display and worked fine. I switched the same cable to the NHD and I see noth...