dfansler
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 4
Comments
Recent activity by dfansler-
ok - thanksDavid
-
Now that I have the display running - and it will only run using the ILI9328 code, I have started to try to fine tune the timing to the display. The values I am having to use are MUCH larger than...
-
Hi Saurabh_B - thinking you were probably off for Good Friday, so I looked at the data on the different examples of code for the 2.4 display, and tried the 3 that seemed post probable.The ILI9340 w...
-
Saurabh_B: here is a list of the displays I have - Thanks, DavidNHD-2.4-240320SF-CTXI#-T 2610 8631N00704TNHD-2.4-240320SF-CTXI# 2610 8631Q100719WNHD-2.4-240320SF-CTXI# 2610 8631Q100719...
-
Will do when I get home this afternoonThanksDavid
-
And the display is a NHD-2.4-240320SF
-
BTW I have tried 3 different displays with no luck.David
-
Opps - I read the .5mm as the pitch rather tha the trace width - I see the pitch is 1mm.
-
What connector is used with the NHD-5.0-800480TF-22 Controller Board? It appears to be a 22pin .5mm pitch. I do not see one listed in the connectors. Top or bottom feed?Thanks,David
-
Ok, so I see that the -22 board has the touch screen outputs. A suggestion - don't have the website display the -20 controller on the same page as a suggestion for the 5" resistive touch display.D...