- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Activity overviewLatest activity by MR9000
Hi everyone,I found the solution. The null-commands during command and data write were not sufficent enough - i added four cycles after setting the port pins, now it works.Thanks for your help! voi...
Hello Ted,yes, IMO pin 31 is tied to VCC and the pins 22 to 29 are the corresponding data pins on the teensy. Since the loop does turn the display on and off, I assume the parallel port is wired co...
Hello,I managed to get the display to periodically switching the display on and off. It displays merely random pixels, but the same on every startup. Since the display on and display off commands d...
MR9000 created a post,
NHD2.4 240320CF-CTXI nothing on screen - initialized right?
Hello,I have an NHD-2.4-240320CF-CTXI#F Display which I want to control with a Teensy3.6. I have set up the 8-bit parallel port and confirmed with a logic analysator that the bits and writes are ok...