fxdxrdr
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Comments
Recent activity by fxdxrdr-
Michael_L,you are correct! Thank you so much, that did it!
-
Changed E = 0 to E= 1, connected 9v with power supply to get 4.88 volts at pic 3 as well as pin 2. Still nothing
-
Thank you for the replyI will try changing E=0 to E= 1. Voltage to Pin3 (V0) is run through a trimmer. However the trimmer is turned all the way, at this point and Pin3 is receiving 4.6 volts.