Paul_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 165
Comments
Recent activity by Paul_B-
I know this might sound odd but can you please tell me what brand microSD card you are utilizing?It sounds like an obvious thing to avoid, but sadly, is there any chance you purchased a fake/bad mi...
-
Morning,I’m sorry to hear about the trouble you are having with the NHD-7.0CTP-CAPE.It would be helpful to see your boot process. To see the actual boot process a RS232 cable like the TTL-232R-3V3 ...
-
Please see the updated FTDI_FT800 & FTDI_FT801 libraries available for download now on our GitHub page! The code successfully complies on version 1.8.1https://github.com/newhavendisplayBest Regards,
-
Morning Tim, I’m sorry to hear about the trouble you are having with the FTDI_FT80x library. As stated previously the FT80x library was originally written with the old IDE, and since then the avr-g...
-
Glad to hear you are up and running! The library was originally written with the old IDE, and since then the avr-gcc compiler has changed and certain keywords/datatypes give errors in the new Ardui...
-
Morning Tim,Can you please try installing version 1.0.6 of the Arduino IDE? https://www.arduino.cc/en/Main/OldSoftwareReleasesIt appears there was a change in the syntax, I'll look into this change...
-
Afternoon,The NHD-FFC18 utilizes an 18-Pin 0.5mm Pitch Bottom Contact FFC Connector.Molex Part#: WM6746CT-ND or Equ.Feel free to contact me if you have any questions or concerns!
-
Hello Graham,The same design details can be applied to the CTP panel, as always be sure to consult with the displays datasheet.It will list vital information such as the capacitive touch panel mate...
-
Matt,Thanks for the update, enjoy the rest of your evening
-
Hey Matt,If it's not a genuine Arduino you can never be quite sure what you are getting. It sounds like the MEGA2560 clone in addition to the NHD-4.3RTP-SHIELD-V is drawing to much power. To preven...