Paul_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 165
Comments
Recent activity by Paul_B-
Hello,Our Slim OLED character displays are available in 2x16, 2x20, and 4x20 character formats.When you send the Double Height command you are doubling the size of the text. i.e Combining the rows ...
-
Excellent, thank you for the clean wiring diagram The good news is that your wiring is correct, the issue must be within your code.Your initialization appears to be correct, I suspect the problem ...
-
Hello Docmur,Thank you for reaching out, can you please post your full pin-out.Based on the configuration you listed below it would appear that you have forgotten to Gnd BS0-BS2 (MPU interface pin ...
-
Not a problem, have a good one! :)
-
Hello,Burn-in (as in ghostly image) is a more susceptible to OLED displays, however it can still occur with standard LCD's.The length of time required for noticeable screen burn to develop varies...
-
Hello,I have seen similar behavior before usually caused by ESD (Electrostatic Discharge) damage to the module / controller. Unfortunately in this case the damage is irreversible, generally devic...
-
Hello Edwin,Since these OLEDs are passive matrix displays unfortunately there will always be slight banding. You can reduce the effect by adjusting the registers like you previously stated.
-
Hello Edwin,Thank you for reaching out, a quick way to verify is to move the location of the 'balls'. If the dark horizontal bands appear in the new location there is an issue with your code.Please...
-
No problem, please keep us posted ;)
-
Hello,Thank you for the additional information. Your display appears to be hooked up correctly which is good! The fading could have been caused due to exposure of moisture.The steam radiator heatin...