Paul_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 165
Comments
Recent activity by Paul_B-
Morning,The NHD-TFT40 is designed to work with our 24-bit Parallel RGB Interface TFT displays that require the RGB pixel data to be clocked in continuously.The backlight driver defaults to 40mA and...
-
REO,Thank you for the information, manual updates will be required to enable all aspects of the display when using the 4.x debian kernels (stock operating system).The BB-BONE-NH7C-01-A0.dts overlay...
-
Rasmus,Have you had a chance to review the NHD-7.0CTP-CAPE 7.0” BeagleBone Black Cape User Guide?https://newhavendisplay.com/content/userguide/NHD-7.0CTP-CAPE_User_Guide.pdfThe NHD-7.0CTP-CAPE is d...
-
Kevin,The email address which you used to register on this forum has rejected my message.If you are interested in receiving the code please contact us at nhtech@newhavendisplay.com Thanks!
-
Hey Kevin,Sorry to hear about the trouble you are having with the NHD-FT81X-SHIELD. All parts are tested before they leave our facility, chances that it is DOA is fairly low.I'm happy to provide...
-
Can you please check which Arduino IDE version you have installed?Second, it might be worth trying a fresh install of the latest Arduino IDE:Arduino files are found in 3 locations: The installation...
-
Morning Peter,I’m sorry to hear about the trouble you are having with the NHD-4.3CTP-SHIELD.As stated previously the FT80x library was originally written with the old IDE, and since then the avr-gc...
-
Arduino UNO or MEGAThe NHD-FT81x-SHIELD is compatible with a wide range of Arduino and Arduino clones, however there are some which are not compatible. The NHD-FT81x-SHIELD requires 5V to be suppli...
-
Please see the topic below: Quote Since you are utilizing the Arduino Due you can safety interface directly to the EVE2 TFT Modules without a logic level converter.Please note that the NHD-FT81...
-
Morning Carl,I've only utilized the EVE Screen Editor V2.3.4 when designing with the 4.3" Arduino Shields which utilize the FT800 & FT801 ICs.Unfortunately, FTDI has not added Arduino support to th...