Paul_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 165
Comments
Recent activity by Paul_B-
Hello,There are no discrepancies within the NHD-5.0-800480TF-ATXL datasheet.The backlight supply current values are: Min - 45, Typ. - 60 and Max. 75 mAThere must be an issue with your wiring or bac...
-
Hello,We do not have a specific part number for driving the backlight, if you search on Mouser for "LED Lighting Drivers" you will find what you are looking for.Please see the link below:http://www...
-
Hello,You're welcome! Thank you for sharing your issue & solution!
-
Hello,The fact that your display is working correctly when you re-insert the capacitive touch cable leads me to believe it is a power up issue. If your CTP initialization and timing do not match wh...
-
Hello,Can you please verify your timing, Page 11 in the FT5x06 datasheet.Link: https://newhavendisplay.com/content/app_notes/FT5x06.pdfThe code snip-it below is a working example on how your CTP in...
-
That is very strange, I have never heard of that issue before. Can you please provide the part number for the FFC connector on your board?
-
Hi Jesse!Great question, when a display has a Hot-bar connector the flex needs to be soldered directly to the pcb. You will not be able to locate any standard FFC connectors to accommodate this.The...
-
Morning Zafi,I recommend using NHD-1.8-128160EF-CTXI#-FT:https://newhavendisplay.com/1-8-inch-standard-resistive-tft-display/Please note this particular display is Non-Stocked and requires a MOQ of...
-
Hello!The LCD connector on NHD-1.8-128160EF-CTXI# needs to be soldered directly to the pcb (via a Hot-bar machine).If you are interested in a traditional FFC ZIF LCD connector I recommend using the...
-
Hello,NHD-1.8-128160EF-CTXI# only supports a 8‐bit Parallel interface.Have a great weekend!