Paul_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 165
Comments
Recent activity by Paul_B-
Hello,To answer your question yes, NHD-C12864LZ-FSW-FBW-3V3 can safely be run at 3.3V (Max.)Please see the "Electrical Characteristics" table listed on page 5 in the displays datasheet https://ne...
-
Glad to hear you got your display up and running!Thanks for sharing your solution, it will definitely help others
-
Morning dalemoore,Thank you for contacting us with this inquiry, I am happy to provide some example Arduino code for you!Please email me directly at pbartek@newhavendisplay.com, feel free to contac...
-
Morning adilmalik,Thank you for contacting us with this inquiry, I am happy to help I found a couple discrepancies in your Eagle schematic, the ST7565R controller datasheet indicates "/RD", "/WR", ...
-
Morning,For 3D model requests, can you please email nhtech@newhavendisplay.com.Thanks!
-
Hello Randy,Glad to hear you got it working, enjoy your display!
-
Hello,Thanks for the update, I went ahead and looked over your initialization sequence and everything seems to be in order. It is possible that the RPi's 1.8k pull -up resistors could be causing a ...
-
Hello,Sounds like your I2C connection is correct, this tells me there must be an issue in your initialization. Can you please share your initialization code?Thanks!
-
Hey j.campanelli,I’m sorry to hear about the trouble you are having with the NHD-12864WX-T1TFH# display.It would be helpful to verify your wiring / pinout. Feel free to post it below :)
-
Hi Adithya,I don't recall if SSH is enabled by default, manual updates may be required when using the 14.0x Ubuntu kernels. It's been a couple years since I've developed with that OS... The boot pr...