Paul_B
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 165
Comments
Recent activity by Paul_B-
Hi Adithya,The default user is Ubuntu , and the password is temppwd .Once you're logged in as the ubuntu user, it is highly advisable to use the passwd command to change the default password to imp...
-
Hello,Thank you for the datasheet! This was a custom design which is why I did not recognize the part number.Please note this is a non-stocked part, there will also be a MOQ (Minimum Order Quantity...
-
Hello,Thank you for reaching out! I'm sorry, unfortunately we do not sell that particle VF-Display. However if you link the datasheet I might be able to find a comparable replacement.
-
Morning,Correct, this VFD display has a 14 pin connection (see picture attached). The 5-wire cable is soldered to Pin NO. 1,2,3,4,6Pin-Out:1. GND2. Vcc3. SI/SO4. STB5. SCKPlease let me know if you ...
-
Hello,To answer your question, yes you can use the linker cable as long as the pin-out matches your motherboards serial header.Please see page 16 in the displays datasheet regarding the pin-out and...
-
Morning Jerry, My BBBW (wireless) has arrived and I've started testing.Out of box the default Debian Jessie OS (booting off the eMMC) appears to run with no problems.Note: No modifications were mad...
-
Hi Jerry,I’m sorry to hear about the trouble you are having with the NHD-7.0CTP-CAPE, it appears to be a software issue.The following thread should provide a solution:https://github.com/beagleboard...
-
Hi Newto,I believe the WiFi/Bluetooth pins were taken from the 10/100 Ethernet pins (don't quote me on that)...The BeagleBone Black Wireless is still fairly new to me, I'll have to do some addition...
-
Afternoon Hendrik,I've completed testing on the NHD-7.0CTP-CAPE utilizing the new BeagleBone Black Wireless and managed to replicate the issue you are experiencing. The issue seems to stem from the...
-
Thank you for the information, can you please let me know which NHD-7.0CTP-CAPE you purchased i.e. L, N, or V?Are you using the Images available for download in the User Guide or spinning your own ...