Ted M.
NHD StaffApplications Engineer at Newhaven Display
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 212
Comments
Recent activity by Ted M.-
Hi Matthew,Unfortunately the US2066 controller does not support double width characters, however there is an option to set a 6-dot width character vs. a 5-dot character in the Extended function set...
-
Please refer to the 5.0" HDMI TFT Module user guide on page 5. See item # 3 for the connector CN4 which controls the backlight PWM. In order to dim the LED backlight, A PWM frequency range of 5khz ...
-
Hi Arrgon,Have you been able to resolve this issue?
-
Hi Arrgon,Below are the commands necessary to initialize the display. Additional support code can be found in our datasheet:https://newhavendisplay.com/content/specs/NHD-0420CW-AW3.pdf More examp...
-
Hi Darshana,I hope you have resolved this. If not, please take a look at the U8glib for some examples:https://github.com/olikraus/u8glibhttps://code.google.com/archive/p/u8glib/
-
The resolution init settings look to be correct for the 7" display. Please review the example Arduino code that is on our Github page for this 7" display and see if it's possible to convert it to ...
-
Thanks for submitting your example code! This is very helpful.
-
Please refer to this post for clarification on the issue of using I2C mode at 5v: https://support.newhavendisplay.com/hc/en-us/community/posts/10846682660247-Problem-with-NHD-0420CW-AY3-Display
-
Hi Steve,It's good to hear you have found the answer.The latest version of our product catalog referenced in your post can also be found on our website here: http://www.newhavendisplay.com/nhd_cata...
-
The Multi-font IC can be left open and unused by floating pins 19,20,21 and 22. The display itself will run independent from the onboard Multi-font IC.