Ted M.
NHD StaffApplications Engineer at Newhaven Display
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 212
Comments
Recent activity by Ted M.-
Hi Killkrt,Both Chip Select signals for the OLED (OLEDCD) and the SD card reader (SDCS) are active low and would need to be active independently of each other. Using a pull-up resistor on each of...
-
Please review this example code on our Github as an example:https://github.com/NewhavenDisplay/NHD-0420CW_font_height/blob/master/4x20_character_OLED.inohttps://github.com/NewhavenDisplay/NHD_US206...
-
Hi oldManDon,Please let us know the part number of the OLED display. Regards,
-
It can be common to see some image streaking as the contrast level is increased to the maximum level when certain patterns are displayed. Try balancing the amount of graphics displayed while low...
-
The DC-DC converter on the OLED display is necessary in order to provide a higher DC voltage level that is required to drive the OLED glass itself.Using the 470uf capacitor to reduce the ripple is ...
-
Hi Sandrom,Prolonged direct sunlight on the OLED screen may produce an excessive amount of heat as well as damaging UV exposure. Both of these conditions will accelerate pixel fading and create ear...
-
Hi Sandrom,Does the pixel degradation occur only on pixels that are always lit?To prevent uneven pixel wear on a passive matrix OLED display, it is recommended to blank the screen often or when not...
-
Hi nova730,The 3D model is on our website https://newhavendisplay.com/2x16-character-blue-modular-oled-arduino-ready-with-i2c-interface/ but for your convenience, here is the download link: https...
-
I have sent you an email with the 3D model of this display. We will be adding it to our website for future reference.Best Regards,
-
I'm sending you an email with the STEP file attached.Regards,Ted