Michael_L
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 216
Comments
Recent activity by Michael_L-
The NHD-4.3-480800EF-CTXP-T has a built-in controller, and therefore using the digital RGB interface with HSYNC and VSYNC is not available. All MCU communication is done through the built-in TFT c...
-
The display can handle 50Hz video (you can see this from the timing requirements in the datasheet for the display and for the controller it uses).As you said, the bottleneck is the MPU being too sl...
-
You would detect the end of a contact with the Put Up event as you have mentioned. The touch event code is the upper 4 bits of the register that holds the upper 4 bits of the x coordinate of the t...
-
You're welcome! Thank you for sharing your issue & solution!
-
How are your connections to the display? Do you have a schematic you can share?
-
I haven't seen this issue, nor have I heard any customers asking about it as of yet. The fact that you have multiple displays makes it very doubtful that it has to do with a defective display. Al...
-
Do you have another display to try? I'm curious to see if this is also occurring on another display, and if the "untouchable region" remains the same or changes.If you do, please try it and let me...
-
As long as you follow the sequence as provided in the example code it should work every time. Take special note of the RESET line being toggled in the beginning and also the delays around it (in ms).
-
Other than electrical issues, I'd say it is a result of improper initialization. I've responded to your previous post with some example code; I've also included it below: //-----------------------...
-
If you would like to explore options for various films that can be put over the front of the display, you may take a look at www.viewthru.net, as they have several different types of these films. ...